Build Your Own Extra-Large Cantilever Gate Hardware Kit - Suitable for Up to 13.5m Opening / 1200kg Gate | European Made | Highly Galvanised | German Steel

Build your own cantilever Hardware Kit 

Please note this is a build your own kit, please choose from the list of parts above to create your kit.

Eight-Wheeled Carriage For Cantilever Gate

Carriage for cantilever gates with up to 13.5 meters clear opening & 1200 kg max gate weight.

Heavy Duty Steel Cantilever Sliding Gate Eight-Wheeled Carriage

Enhanced design and superior products from Europe using high-quality German steel.

Formed from high-quality, heavily galvanized German steel in an 18-stage process with a slow rolling speed to reduce heat build-up and memory.

• The steel is sourced from the leading German company Wumperman. It is galvanized after slitting so that there are no exposed raw steel edges that would otherwise quickly rust.
• The slow rolling process minimizes the tendency for the track to spring open where it is cut to length.

"C" Profile Guide For Cantilever Gate, 6mm Special Thickness, Galvanized German Steel

"C" Profile Guide For Cantilever Sliding Gate, 6mm Special Thickness, Hot Dipped Galvanized German Steel, 

Steel "C" Profile Guide For Cantilever Sliding Gate

Enhanced design and superior products from Europe using high-quality German steel.

Formed from high-quality, heavily galvanized German steel in an 18-stage process with a slow rolling speed to reduce heat build-up and memory

• Holes at the track's top allow it to be easily bolted to an aluminium gate.
• The steel is sourced from the leading German company, Wumperman. It is galvanized after slitting so that there are no exposed raw steel edges that would otherwise quickly rust.
• The slow rolling process minimizes the tendency for the track to spring open where it is cut to length.

Bolts and Rivet Nuts Pack for "C" Profile Guide Cantilever Sliding Gate

Bolts and Rivet Nuts are Included in each Cantilever "C" Profile Guide

Bolts and Rivet Nuts for Cantilever Sliding Gate Guide Track

• Slotted Hole Punched Every 400mm in "C" Profile Guide Track
• Bolts and Rivet Nuts Pack
• Easy Assembly
• No Welding Required

Large Guide Support Wheel For Cantilever Sliding Gates

The end wheel guides the gate onto the end cup and helps support the gate while it rests.

End Wheel For Cantilever Sliding Gate Systems (CAIS)

Cantilever Gate Hardware Large Guide Support Wheel (CAIS | RUN L)

Large End Cap for Cantilever C Gude Track

The end cap is an addition to the gate to cap off the cantilevered track.

End Cap For Cantilever Sliding Gate (CAIS PILOT L / PILOT LN)

Cantilever Gate Hardware Large End Cap

209mm Large End Stop for Cantilever Sliding Gates

The end stop supports the gate when open and closed.

End Stop For Cantilever Sliding Gate (CAIS LAST L)

Cantilever Gate Hardware Large End Stop

End Stop "CAIS PADDOCK L" for Cantilever Gates

Galvanized Steel End Stop for Cantilever gate.

"PADDOCK L" Provides vertical stability to a Cantilever gate in the closed position.

Surface finish: ISO 19598 - Fe//Zn12//Cn//T2nL (Hot Dipped Galvanized)

End Stop Bracket for Cantilever Sliding Gates

The end stop bracket supports the gate when it is fully open and fully closed.

End Stop Bracket For Cantilever Sliding Gate

Cantilever Gate Hardware End Stop Bracket

"C" Profile Guide For Cantilever Gate, 5mm Thickness, Hot Deeped Galvanized German Steel

"C" Profile Guide For Cantilever Sliding Gate, 5mm Hot Deepped Thickness, Galvanized German Steel

Steel "C" Profile Guide For Cantilever Sliding Gate

Enhanced design and superior products from Europe using high-quality German steel.

Formed from high-quality, heavily galvanized German steel in an 18-stage process with a slow rolling speed to reduce heat build-up and memory

• Holes at the track's top allow it to be easily bolted to an aluminium gate.
• The steel is sourced from the leading German company, Wumperman. It is galvanized after slitting so that there are no exposed raw steel edges that would otherwise quickly rust.
• The slow rolling process minimizes the tendency for the track to spring open where it is cut to length.

Cantilever Sliding Gate Hardware in Australia

Reliable, Track-Free Gate Systems for Australian Homes and Businesses

What Is a Cantilever Sliding Gate?

A cantilever sliding gate operates without a track on the ground. Instead, it uses cantilever sliding gate hardware, including rollers, brackets, and Cantilever Carriage Wheels that support the gate above the surface. This makes it ideal for Australian properties with gravel or non-concrete driveways. Cantilever sliding gates can handle uneven terrain. Whether its a gravel driveway, grassy area, or even waterlogged ground, cantilever gates remain functional

Differences Between Cantilever and Traditional Sliding Gates

Why Choose Cantilever Sliding Gate Hardware in Australia?

• No ground track required ideal for Australian terrain
• Perfect for gravel, sloped, or uneven driveways
• Durable and weather-resistant for harsh Australian climates
• Low maintenance and long lifespan
• Silent and smooth operation with no ground friction
• Modern and stylish appearance for Australian homes and businesses

Applications Across Australia

Cantilever gates are widely used across Australia from suburban homes in Melbourne and Sydney to commercial sites in Brisbane, Perth, and Adelaide. Whether you're in a coastal region or rural setting, this hardware is designed to perform reliably under Australian conditions.

Final Thoughts

Selecting the right gate system is crucial for achieving long-term performance and maintaining property value. Cantilever sliding gate hardware is the preferred solution for Australians seeking a durable, stylish, and easy-to-install gate system that can handle Australias diverse terrains and weather.

Looking for premium cantilever gate hardware kits in Australia? Contact us today to learn more or request a quote.

Contact Us

•  sales@automotionplus.com.au
•  1800 694 283