Close

Post-Mounted e-Loop Side-On Wireless Vehicle Detection System - Commercial e-Loop (Presence Mode, Dual Sensor Technology, Magnetic Field and Radar Detection) Automatic Gate Vehicle Access Control | Wireless Vehicle Post-Mount Loop Sensor. Ideal for Driveways for Unsuited to Traditional Ground-Mounted Loops, and Low-Clearance Vehicles, Roof-Mounted Sensors, and Parking Control.

W-LD-PM-CPT50

Product Information

Wireless Vehicle Detection Systems |
Commercial Post-Mounted eLoop - PRESENCE MODE

Introducing a new generation of wireless vehicle detection with added radar protection. The Post-Mounted eLoop replaces traditional wired inductive loops, saving you time and money while increasing reliability and safety.

 

The Post-Mounted e-Loop is Microtech Designs’ solution to side-on vehicle detection. Ideal for driveways unsuited to traditional ground-mounted loops, low clearance vehicles, roof-mounted sensors and parking control. For surfaces with an uneven texture/unsuitable for drilling (cobblestone, slate, pavers), simply install a post ~600mm off the ground. Install with e-Loop facing the desired detection area.

 

Commercial Wireless Loop Detection Sensor |
Post-Mounted eLoop PRESENCE MODE WITH ADDED RADAR PROTECTION

Commercial Post-Mounted eLoop Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby Microtech transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed at the post, ~600mm off the ground of entry or exit passages, contain replaceable batteries, and can withstand almost any vehicle.

The Post-Mounted Wireless Vehicle Detection System utilises military-grade magnetometer sensors. With added radar confirmation, to detect the presence and movement of vehicles. Code the Post Mount to the included transceiver, calibrate and you’re ready to go. Once the sensor has detected a vehicle, a signal is sent to a nearby transceiver. Capable of operating in all weather conditions.
Note: Gate or door controller must have a dedicated open input and an auto close function enabled.

Post-Mounted eLoop Installation in 3 simple steps (in less than 30 minutes).

  1. Coding e-LOOP into e-Trans 50
  2. Fitting e-LOOP
  3. Calibrate e-LOOP

Added Radar Functionality

Microtech Radar® sensors can detect vehicles that are stopped above the e-loop. The added radar utilises a two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched, and confirmation will be sent back to the e-loop. The radar will check if a vehicle is present if the magnetic field drops below the set threshold. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. Multiple attempts will be made to ensure safe operation if the confirmation is missed. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include Dead zone, sensor distance, sensitivity, magnetic field release level, and confirmation mode.

Functions | Commercial Wireless Vehicle Sensor | Post-Mounted eLoop Detector

Lower power consumption

3-axis magnetometer for vehicle detection

  • 8 Hz sampling rate
  • Auto-calibration
  • Exit/Entry detection mode
  • Presence detection mode

Fast and simple installation

  • Quick non-permanent installation
    eLoop sensors are installed at the post, ~600mm off the ground of entry or exit passages
  • Unobtrusive install

Up to 3-year battery life

  • Compact design
  • Compatible with various gates

Reliable radio communications with a transceiver

  • Reliable radio communication
  • High-security 128-bit AES Encryption

Battery Life vs Daily Activation

Note: Battery life is dependent on many factors, including daily activations, time used per activation, radar range and external conditions.

 

Post-Mounted e-Loop Wireless Vehicle Detection Systems

The Post-Mounted e-Loop commercial is the epitome of perfection regarding wireless vehicle detection systems explicitly designed for commercial settings.

With its wireless nature, installation becomes a breeze, eliminating the need for complex wiring systems and minimising disruption to the existing infrastructure. Moreover, the system's efficient energy consumption and low maintenance needs make it a cost-effective solution that ensures long-term reliability.

Additionally, the Post-Mounted e-Loop commercial is available with a convenient presence mode, which intelligently keeps gates and barriers open for an extended duration when longer vehicles are in motion over the detection area. This advanced functionality enhances safety and efficiency by minimising interruptions and reducing the risk of collisions, further solidifying its suitability for commercial environments.

Security remains paramount with the E-loop commercial, integrating advanced 128-bit encryption to safeguard sensitive data and instil confidence in users. With a detection range extending up to 45 meters, it delivers precise and dependable vehicle detection, augmenting operational efficiency and safety within commercial operations. In essence, the E-loop commercial epitomises excellence by offering effortless installation, enduring reliability, and cutting-edge security features tailored specifically for commercial applications.

 

 

 

Features | New Generation Wireless Vehicle Loop Detector (Post-Mounted eLoop Presence Mode)

  • Dual sensing technology 
  • Quick and easy installation.
  • Install a post in the driveway
  • Presence Mode | Dual sensor technology - Magnetic field and Radar detection.
  • Magnetic sensor for vehicle detection
  • Radar sensor for added safety
  • The 2x1.5 V 3000mAh AA Lithium Batteries provide up to 3 years of battery life (depending on usage and mode).
  • Small compact design – 176 mm*70 mm*30 mm Dimensions (IP68).
  • High-security 128-bit encryption.
  • Range up to 30 meters.

 

Power, Physical and Environment

Power: 2 * 1.5 V 3000mAh AA Lithium Batteries

Dimensions: 176*70*30mm

Weight: 200g

Mounting Style: Post Mounted 600 mm Above Ground.

Protection: IP68 ingress protection

Operating Temp : -40° to 80° C

Standby Power: 14µA

Activation Power: 35mA

 

Magnetometer Detection Area

The Post-Mounted e-Loop features brand-new sensors, offering an extended detection range and impressive accuracy. With Magnetometer & Radar ranges extending up to 3m, and a substantially reduced dead zone.

 

Radar Read Distance

The Post-Mounted e-Loop is ideal for preserving aesthetics, managing heavy vehicles, driveways unsuitable for surface mounting and compatibility with ceiling mounting. Offered exclusively with presence mode capability, the Post-Mounted e-Loop can operate in both presence mode and exit mode (use of diagnostic tool needed).

 

 

 

E-Trans-50 Single Channel Transceiver

Wireless access control system for gate and door applications.

Featuring a compact design with exceptional range, the e-Trans-50 is designed to manage access control for home and commercial systems.

A long-range wireless transceiver that can work with both gates or automatic doors. The small design allows it to be easily installed without compromising on the exceptional range.

 

Specifications

Voltage: 10-36V DC

Current draw standby: 4.5 m/a

Current draw active: 30 m/a

Frequency: 433.39 MHz

Remote storage: 50 remotes, 4 x e-Loops, 4 x keypads, 4 x entry buttons

Relay: 1-amp contact rating, COM and N/O connections x 1 relay

Modes: Pulse, Latch and Hold

 

FEATURES

  • Compact design with an exceptional range

  • SMA connector standard for external long-range antenna connection

  • Wide Voltage Range: 10-36V DC

  • Exceptionally low Current draw: standby 4.5 m/a, active 30 m/a

  • Frequency: 433.39 MHz

  • Remote storage: 50 remotes, 2 x Keypads, 2 x Entry Buttons

  • Relay: 1-amp contact rating, COM and N/O connections x 1 relay

  • Multiple Modes: Pulse, Latch and Hold