Motorline 2 Channel External Receiver. It can be used on door locks, gates and garage doors. The Two-Channel External Receiver lets you operate any automation via Motorline remote and wireless accessories.
MOL-MR5-2CProduct Information
Motorline Receiver with 2 channels: monostable and bistable.
Motorline 2 Channel External Receiver with a box. Accepts up to 500 Rolling Codes. A dual-channel radio receiver allows the control of electric and electronic devices. Two-Channel External Receiver. It can be used on gates and garage doors. It lets you operate any automation via Motorline remote and wireless accessories.
CONNECTIONS SCHEME
The dual-channel radio receiver allows control of electric and electronic devices when coupled with one or more transmitters.
TECHNICAL SPECIFICATIONS
CONNECTOR’S DESCRIPTION
01- 12-24V AC/DC Power supply
02- 0V Power supply
03- CH1 contact output - NO
04- CH1 contact output - NO
05- CH2 Contact output - NO
06- CH2 Contact output - NO
07- Antenna mass input
08- Antenna hot pole input
CHARACTERISTICS BOARD
- Frequency: 433,92 MHz
- Power supply: 12-24Vac/Vdc
- Maximum consumption: 5W
- Code type: 12-18-32 Bit or Rolling Code
- Code memorization: (CH1 + CH2) 500 Max
- Relay: 30V DC 1A
- Temperature: -25°C to 55°C
- Dimensions: 53x82x40mm
- Range in open space: 50-100m
- Protection Grade: IP 42
JUMPERS
By selecting Jumper J1 position, you can select the power supply voltage:
| POSITION | VOLTAGE |
| Pos. 1-2 | 12V AC/DC. |
| Pos. 2-3 | 24V AC/DC (from factory). |
CH1 (CHANNEL 1) AND CH2 (CHANNEL 2) OPERATING TYPE
The receiver can manage the two channels individually and also allows for different functioning modes:
Channel CH1: Monostable functioning only with the possibility of activation of Distance Programming.
Channel CH2: By selecting the SW1 Switch, it is possible to select the following functioning modes for channel CH2 (Distance programming mode and monostable mode).
